AUTOSCRUB Surface Prep Sponge U Shaped Car Detailing Tools

The AUTOSCRUB Surface Prep Sponge, leveraging innovative advanced rubber polymer technology (eliminating the need for clay bars), works rapidly to deliver professional-level results. It safely and effortlessly removes paint overspray, water spots, fresh tree sap, rail dust, and other bonded surface contaminants from automotive paint, glass, moldings, and plastic surfaces.

• Easy Cleaning: The AUTOSCRUB can be cleaned simply by rinsing off accumulated contaminants with water. Even if dropped on the ground, just rinse the sponge pad clean and it’s ready for continued use.
• Smooth Handling: It glides easily, enabling stable and controlled operation, without the constant reshaping needed with clay bars.

• Spray: Apply an adequate amount of lubricant onto the paint surface. Note: Ensure the lubricant doesn't dry out on the surface.
• Use Autoscrub: Glide the Autoscrub across the lubricated paint surface in a back-and-forth motion, using light to medium pressure.
• Wipe: Gently wipe and buff away any residual lubricant from the paint surface with light pressure.

• Lubrication is Critical: Sufficient lubrication is essential during AUTOSCRUB operation—insufficient lubrication may affect performance or surface safety.
• Do Not Use Plain Water as Lubricant: Plain water cannot provide adequate lubrication and is not suitable for use with the AUTOSCRUB.
• Avoid Contact with Solvents: The AUTOSCRUB is not solvent-resistant; keep it away from solvents to prevent damage to the product.
• Pre-Clean Tar & Grease: Before using the AUTOSCRUB, remove tar and grease from the surface first—these substances may interfere with contaminant removal or damage the product.