Grey Magic Auto Detailing Clay Sponge Reusable 160x95x35mm

Product Composition

• Sponge Matrix: Usually made of high - density and high - elasticity sponge material. It has a soft texture, can fit various curves and shapes of the car paint surface well, is convenient to operate, and at the same time reduces frictional damage to the paint surface during the wiping process.

• Clay Coating or Mixed Material: A special clay - like material is attached to the mesh cloth,  this clay - like material has a certain degree of stickiness and adsorbability, which is the key part for achieving deep cleaning.

Functional Features

• Efficient Cleaning: It can effectively remove various stubborn contaminants on the car paint surface, such as iron powder, tree sap, bird droppings residues, brake dust, asphalt particles, industrial dust, etc. Ordinary car washing methods are difficult to completely remove these contaminants. However, the clay - rubbing sponge can peel them off from the paint surface through the stickiness of the clay - like material, restoring the smooth texture of the paint surface.

• Protecting the Paint Surface: Compared with some rough cleaning tools, the clay - rubbing sponge has a soft texture. As long as it is used correctly (with sufficient lubricant), it is not easy to cause scratches or damage to the paint surface, achieving deep cleaning while protecting the integrity of the car paint.
• Convenient to Use: Its sponge - like shape is easy to grip, and it is more flexible to operate than traditional block - shaped clay - rubbing products. Especially when dealing with some edges, corners and other parts, it can reach more easily, improving the cleaning efficiency.

Usage Method

• Pre - cleaning: Before using the clay - rubbing sponge, rinse the vehicle with clean water first to flush away as many large - particle dust and sand as possible on the surface. Then, use a neutral car wash soap in combination with a car wash sponge or towel to perform a preliminary cleaning on the vehicle to remove the relatively easy - to - remove stains on the surface.
• Preparing Lubricant: Use a special clay - rubbing lubricant, or dilute a neutral car wash soap to be used as a lubricant. Spray the lubricant evenly on the paint surface area that needs to be cleaned to ensure that the paint surface is fully moistened, so as to reduce the friction between the clay - rubbing sponge and the paint surface.
• Cleaning Operation: Gently squeeze the clay - rubbing sponge to make it fully contact with the paint surface, and then move it on the paint surface in a slow and stable manner. Clean in a certain order (such as starting from the roof and gradually cleaning the side of the car body, the rear of the car and other parts downwards). When the surface of the clay - rubbing sponge has adsorbed a lot of dirt, it can be rinsed in clean water, and the dirt can be squeezed out before continuing to use.
• Subsequent Treatment: After completing the cleaning, rinse the vehicle with a large amount of clean water to thoroughly rinse off the remaining lubricant and dirt, and then dry the vehicle with a clean towel.

Precautions

• Avoid Dry Wiping: Dry wiping will greatly increase the risk of causing scratches on the paint surface. Therefore, during the entire cleaning process, there must be sufficient lubricant on the paint surface.
• Regular Replacement: As the number of uses increases, the clay - like material on the clay - rubbing sponge will gradually wear out and the adsorption capacity will decrease. When it is found that the cleaning effect is significantly worse, a new clay - rubbing sponge should be replaced in time.
• Storage Method: After use, clean the clay - rubbing sponge, squeeze out the water, and store it in a cool and dry place. Avoid direct sunlight and high - temperature environments to prevent the sponge from aging and the clay - like material from deteriorating.

Application Scenarios

• Daily Cleaning and Maintenance: Suitable for car enthusiasts to regularly perform deep cleaning on the vehicle, keep the paint surface clean and tidy, and enhance the appearance of the vehicle.
• Pretreatment Before Cosmetic Projects: Before carrying out car beauty projects such as waxing, crystal plating, and film coating, using the clay - rubbing sponge to clean the paint surface can remove surface impurities, make the beauty products adhere to the paint surface better, and improve the beauty effect and durability.